Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Exeter
If your automatic gate has stopped opening, closes partway and reverses, or won’t latch at all, we can help. We handle electric gate repair for homeowners, landlords and property managers in Exeter and the surrounding Tulare County ag land, and our technicians work on the actual gate and operator you own rather than steering you toward a new unit. Our technicians have up to 14 years of experience, and electric gate work is the only trade we do. Call (844) 702-1433. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Gate gates here tend to be older and more hard-used than what you’d find in a newer subdivision. In-town driveways carry mid-century wrought-iron, chain-link and wood gates. The orchard and ranch entrances on the edges of town carry long tube and pipe gates that move equipment every day. Both kinds fail in ways that reward someone who knows the brand and the vintage. That’s the work we do in Exeter.
Why Exeter Homeowners Call Gate Repair Visalia for Electric Gate Repair
We’re a gate-trade specialist, not a general handyman outfit that also hangs a gate now and then. Every technician we send out works on gates every day. That matters in Exeter, where a swing gate on an older driveway might have a LiftMaster or FAAC operator from well before modern safety standards, and the diagnosis depends on reading the whole system rather than swapping a part and hoping.
We’re familiar with nine major gate and operator brands, including professional-grade names like FAAC, BFT and DoorKing. When you tell us what’s on your gate, the technician arrives already knowing the quirks of that operator, the control board architecture, and which faults are common to that generation. That shortens the visit and cuts down on guesswork.
Exeter sits in the San Joaquin Valley’s irrigated citrus belt, and that shapes the repair calls we get. Hot, dry summers and the periodic winter tule fog cycle the metal and the wood. Steel gates expand and their hinges and latches seize with dust. Wood gates crack and warp from the dry-heat cycling. Gates that hung fine in spring often need adjustment by late summer. Knowing that pattern is half the diagnosis before anyone gets out of the truck.
We serve Exeter, Farmersville, Ivanhoe, Visalia and Strathmore. If you’re in town, we know the older in-town streets and the rural fringe properties, and we can talk through what’s likely wrong on the phone before we book the visit.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Automatic Gate Repair in Exeter
Automatic Gate Repair in Exeter usually starts with a gate that won’t open, opens only partway, or reverses on the way closed. The first thing a technician checks is the hinge post for sag and the gate for rack and pinion wear, because an operator that’s straining against a settled or misaligned gate will keep tripping out no matter what you replace. A typical automatic gate repair call in Exeter runs $180 to $420, and the written estimate sets the final price before any work starts.
When the post has settled in the valley’s expansive clay soils, the fix combines post stabilization or sag correction with the electrical repair. Skipping the mechanical side is why some gates fail again a few months after a board swap. Estimating the whole job on the first visit is the honest way to price it.
Diagnosing the Operator and the Gate Together
An operator’s symptoms and the gate’s symptoms are not the same thing. A control board fault and a binding hinge can both stall a gate, and the repair differs completely. We test the operator under load and check the gate’s travel by hand so the diagnosis is based on the actual cause.
Post and Hinge Stabilization
Hinge posts settle and corrode, especially where irrigation runoff works at the base. That pushes the gate out of square and strains the operator’s gearbox with every cycle. Stabilizing the post and re-hanging to correct sag is often what lets the existing operator keep working correctly.
Electric Gate Motor in Exeter
Electric Gate Motor problems in Exeter often show up as a gate that moves slowly, groans under load, or stops dead with the motor humming. Motor faults split into two families: the motor itself failing from age and heat, and the motor being asked to move a gate it was never sized for. A typical electric gate motor repair in Exeter runs $250 to $650, and a full motor replacement runs $600 to $1,400 depending on the gate’s weight and daily cycles. Prices are estimated per job and confirmed in writing before work begins.
On orchard and ranch properties around Exeter, a tube gate that gets moved several times a day wears its motor far faster than a residential driveway gate that opens twice. Correct sizing by actual weight and daily cycles is the difference between a motor that lasts and one that keeps coming back.
Motor Sizing for Agricultural and Residential Gates
A motor built for a light residential swing gate won’t survive an ag-duty cycle on a long tube gate. We size replacements to the gate’s real weight and frequency of use, which is often the missing piece on a gate that’s had several motors fail in a row.
Control Board and Wiring Faults
The motor is often fine when the gate stops, and the fault is upstream in the control board or the wiring. Pre-2000s operators sometimes have boards that are no longer made, and that shapes whether the right move is a retrofit kit or a new operator. We trace the circuit before recommending either.
Trusted Brands We Service in Exeter
We’re familiar with the major gate and operator brands homeowners and property managers in Exeter actually own: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule. We don’t keep parts stock, so we diagnose what’s on your gate and source what the repair needs rather than pulling from a shelf. Because we work with whatever brand you already have, we’re not pushing a replacement to protect a dealer relationship. You get the repair your gate needs, on the operator you already own. When a part has to be ordered, we tell you that up front so the timeline is clear and there are no surprises when we schedule the return visit.
Common Electric Gate Repair Problems We See in Exeter Homes
- Obsolete control boards in older operators. Many pre-2000s operators in Exeter can’t be programmed for modern safety photocells, so the technician has to weigh a retrofit kit against a full operator replacement. That call comes down to the board’s age, the gate’s condition and how much life the operator has left.
- Hinge post settlement and corrosion. The valley’s expansive clay and irrigation runoff work at the base of hinge posts and push gates out of square. The symptom is a latch that misaligns and an operator that strains on every cycle.
- Dust and heat seizing hinges and tracks. The San Joaquin Valley’s dry summers pack dust into swing gate hinges and slide gate tracks, and things that moved freely in spring bind by late summer. Orchard tube gates are the worst case, because a stuck gate blocks equipment access entirely.
- Cracked and warped wood gates. The dry-heat cycling cracks and warps wood driveway gates on older in-town properties. A warped gate throws off the latch alignment and loads the operator unevenly, so the mechanical fix and the electrical fix usually go together.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in Exeter, CA
Here’s what gate repair typically runs in Exeter. Automatic gate repair, covering diagnosis and the electrical or mechanical fix, runs $180 to $420. Electric gate motor repair runs $250 to $650, and a full motor replacement runs $600 to $1,400. Control board retrofit or replacement runs $200 to $550, and safety sensor repair runs $120 to $300. Those are estimated ranges for the local market, not a fixed menu. What moves the number is the operator’s age and brand, whether the hinge post needs stabilization, whether the gate needs re-hanging or new hardware, and whether an obsolete board can be retrofitted or forces a replacement. The written estimate sets the final price, and we quote it before any work starts, so there’s no invoice surprise. Estimates are free. Call (844) 702-1433 to book one.
We Also Serve Cities Near Exeter
We cover the towns around Exeter as well, including Farmersville, Ivanhoe, Visalia and Strathmore. If you’re on the rural fringe outside town or on a property between these communities, we can talk through the gate over the phone and schedule a visit. Wherever you are, call (844) 702-1433 for a free estimate.
Serving Exeter, CA – Our Local Coverage Area
We serve Exeter and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Exeter
Sometimes yes, and sometimes the board is too old to accept them. Many pre-2000s operators can’t be programmed for modern safety photocells, so the technician has to check whether a retrofit kit exists for that specific board. If one does, a retrofit is usually the cheaper answer. If it doesn’t, a new operator is often the only path to compliant safety devices. Call (844) 702-1433 for a free estimate.
Heat and dust are usually behind it. The San Joaquin Valley’s dry summers expand the steel, dry out the wood, and pack dust into the hinges and latches. Cumulatively that throws the latch out of alignment by late summer. A seasonal adjustment on the hinges and latch is often enough, and stabilizing a settled hinge post fixes the problem at the root. Call (844) 702-1433 for a free estimate.
A seized hinge or track, a settled post, or a motor straining against both is the usual cause. On orchard tube gates around Exeter, dust and heat-driven seizing is common, and a sagging hinge post misaligns the latch so the gate binds even if the motor still turns. A technician checks the hinge, the track and the post for sag before touching the operator. Call (844) 702-1433 to schedule a visit.
It depends on the board and the motor, and the honest answer is that a repair is often cheaper when the board is still serviceable. If the control board is obsolete and won’t accept modern safety devices, and the motor is near the end of its life, a replacement sized for the gate’s weight and daily cycles is often the better long-term number. The written estimate will show you both paths so you can choose. Call (844) 702-1433 for a free estimate.
Most automatic gates need safety devices that stop or reverse the gate when something is in its path, along with the controls and labeling a modern operator calls for. The exact rules depend on your gate type and the authority having jurisdiction, so check with your city about what applies to your property. We can assess your operator and tell you what it will accept. Call (844) 702-1433 for a free estimate.
Get Your Exeter Gate Fixed
Whether it’s an older in-town swing gate with a board that’s seen better days or an orchard tube gate that won’t slide, we can diagnose the actual fault and fix it. We work on your gate brand, we quote the price before work starts, and we don’t push a replacement you don’t need. Call (844) 702-1433 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Gate Repair Visalia.