Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Exeter
If a driveway gate is dragging, a latch won’t catch, or an operator has quit with the gate stuck open, we’re the gate specialists to call in Exeter. We work on residential driveways and orchard entrances throughout the 93221 area, and we know these gates well: older iron and chain-link swings, long pipe gates out on the ranch edges, and the legacy openers that came with them. Our technicians have up to 14 years of experience, and every one of them works on gates every day. Call (844) 702-1433 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Exeter Homeowners Call Gate Repair Visalia for Gate Repair
Exeter is a small citrus-and-ag town, and the gate work reflects it. Most of it is on residential driveways and orchard or ranch entrances rather than commercial properties, which means we spend our days on the hardware that actually fails here: hinge posts shifting in valley clay, dusty operators, worn latches on tube gates.
That single-trade focus is why folks in Exeter call us. We’re not a general handyman shop that takes gate jobs on the side. We’re familiar with nine major gate and operator brands, so we arrive already knowing the quirks of a LiftMaster board or a FAAC arm instead of reading a manual in your driveway. We fix the right problem rather than pitching a whole new gate.
We serve Exeter and the surrounding Tulare County roads, and we’re familiar with how the older in-town neighborhoods and the unincorporated fringe differ. Dispatch runs 7am to 7pm, Sunday through Friday, so same-day repair is often possible when you call early. The estimate is free, and the price you agree to before work starts is the price on the job.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Iron Gate Repair in Exeter
Iron Gate Repair in Exeter usually starts with a swing gate that sags and drags, and the cause is almost always the hinge post rather than the panel. The town’s mid-century homes (1940s through the 1970s) still carry a lot of original wrought-iron and chain-link driveway gates, and their posts have been sitting in the valley’s expansive clay through decades of irrigation runoff. We correct the footing and hinge alignment first, then true the gate so it swings clean. A typical iron gate repair in Exeter runs $180 to $420 for post and hinge work, with gate realignment in the $150 to $350 range.
Hinge, Post, and Weld Work
A hinge post that has heaved or rotted is a footing job, not a matter of tightening bolts. Once the post is right, we check the welds and the latch strike so the gate latches without a shove. If rust has eaten into a stile, weld and rust repair resecures it before it becomes a replacement.
Why Sag Keeps Coming Back
Tightening hinges on a shifted post only buys a little time. The post moves again the next time water sits at its base, so we deal with the soil and the footing underneath the hardware. That’s the difference between a fix and a patch.
Sliding Gate Repair in Exeter
Sliding Gate Repair in Exeter often means an orchard or ranch tube gate that binds at the latch or the rack and pinion, cutting off equipment access when you need it most. Dust and heat cycling seize the latches and racks on these long gates, so the fix usually involves cleaning and lubricating the rack, replacing worn rollers, and realigning the track rather than swapping the whole gate. A typical sliding gate repair in Exeter runs $220 to $520, while an electric or automatic gate repair with operator and sensor work lands in the $300 to $650 range.
Rack, Pinion, and Roller Service
Grinding and jerking on a sliding gate usually traces to a worn pinion gear, a galled rack, or a roller that has flat-spotted. We replace the worn parts and set the travel so the gate stops clean at both ends. Lubricating the rack and checking rollers keeps it running through harvest season.
Operators That Have Quit
When the operator itself won’t move the gate, we test the control board, motor, and safety sensors before recommending anything. Old LiftMaster and Linear boards fail from Valley dust and heat, sometimes leaving the gate stuck open or closed. We tell you honestly whether the board can be repaired or the operator needs replacing.
Trusted Brands We Service in Exeter
We service the gate brands you already own. That includes Mighty Mule, LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite. Because we’re independent, we don’t push replacements or proprietary parts to protect a dealer relationship. We keep no parts stock in Exeter; instead we diagnose your system, order the right part, and get your gate working. If your operator is an older LiftMaster or a Linear that’s been running a farm gate for years, we know the failure points on it before we pull into the driveway.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Exeter Homes
- Heaving or rotted hinge posts. Mid-century iron and chain-link gates sag because the post has shifted in clay soil, and irrigation runoff speeds it up. Correcting the footing fixes the drag that tightening hinges can’t cure.
- Obsolete control boards. Older LiftMaster and Linear operators fail from dust and heat, leaving the gate stuck open or closed. Sometimes there are no replacement parts, and that’s when an honest replacement call has to be made.
- Orchard tube gates that bind. Dust and thermal expansion seize latches and rack and pinion on long pipe gates, blocking equipment access during harvest or irrigation season. Cleaning and new rollers usually solve it.
- Worn locks and latches. Repeated use and dust wear the lock and latch on older driveway gates. Lock repair and latch replacement keep the gate secure without a full rebuild.
Pricing for Gate Repair in Exeter, CA
Prices for gate repair in Exeter are set per job by a written estimate, and the free estimate is your chance to know the number before anything starts. Simple hinge and latch work is on the lower end, while post correction, realignment, and electric gate repair with operator or sensor replacement run higher. Iron gate and hinge work typically falls in the $180 to $420 range. Sliding gate repair with rack and roller service runs $220 to $520. Electric and automatic gate repair, including control board and safety sensor work, is in the $300 to $650 range. How much a job costs depends on the gate’s condition, whether the post footing needs correcting, and whether parts have to be ordered. There’s no charge to look, and no work begins until you agree to the written price.
We Also Serve Cities Near Exeter
We repair gates in the towns around Exeter too, so if you’re just outside town we can still help. That includes Farmersville, Ivanhoe, Strathmore, and the roads into Visalia. Same single-trade focus on gates wherever you are. If you’re not sure whether we cover your road, call and we’ll tell you straight.
Serving Exeter, CA – Our Local Coverage Area
We serve Exeter and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Exeter
In many cases you can retrofit entrapment protection onto an older operator, though it depends on whether the control board has an input for the sensor and whether replacement parts still exist. UL 325 compliance is a common upgrade request here in Exeter because so many mid-century gates were hung before modern safety requirements existed. We’ll test your board and tell you honestly whether a retrofit is possible or a new operator is the more reliable route. Call (844) 702-1433 for an exact quote. Estimates are free.
Because the hinge post has shifted, not the hinge itself, so tightening the hardware won’t hold. In Exeter, the valley’s expansive clay soil and irrigation runoff move the post at its base, and any adjustment at the hinge loosens again once the post moves. The real fix is correcting the post footing and realigning the gate to it.
Most often it’s a worn pinion gear, a galled rack, or a roller that has flat-spotted from dust and heat. Grinding and jerking mean metal is wearing on metal, so it usually needs a new pinion and rollers plus a clean and lube of the rack. We’ll diagnose it and quote before work starts. Call (844) 702-1433.
Yes. Solar-powered operators on orchard and ranch tube gates are common around Exeter, and we service those systems along with the gate’s hardware. We check the panel, the battery, the control board, and the gate’s rack and rollers together, since a solar operator can only do so much with a binding gate. Call for a free estimate.
If the control board is obsolete and no replacement is available, or if the failure is repeated across multiple components, replacement is usually the cheaper answer. We weigh the repair cost against a replacement honestly rather than pushing a new unit. Our technicians have up to 14 years of experience and can give you a straight answer.
When a gate in Exeter stops working, the fastest way through it is to call a specialist who works on gates every day. We handle iron gate repair, sliding gate repair, and electric and automatic gate repair across Exeter and the surrounding roads, and the estimate is always free. Call (844) 702-1433. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The price is quoted and agreed before any work starts, and the written estimate sets the final number.
Written by the team at Gate Repair Visalia.